LE | Z Series

The all-rounders for the continuous separation or clarification of liquids

Fast. Flexible. Resistant.

High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time (only specific density differences are suitable). The max. throughput will be reduced at liquid-liquid separation. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor.


  • Continuous feed, manual solids discharge
  • Throughput ranging from a few litres to 3,000 l/h
  • g-force max. 16,000 – 70,000
  • Solids uptake* 0.25 – 10 litres *depending on the solid

Technical Data

Type/Model LE / LE GP Z 11 Z 41 / Z 41 GP Z 61 / Z 61 GP Z 101 / Z 101 GP
Throughput min./max. [l/h] 5/30 5/30 20/500 50/1500 150/3000
Throughput suggested [l/h] 15 5 120 360 480
Speed [min-1] 40,000 54,000 20,000 17,000 14,000
RCF (G-value) [* g] 40,000 70,000 17,000 17,000 15,500
Nominal capacity [l] 0,25 0,25 2 6 10

*The maximum throughput refers to optimum product parameter. The suggested refers to a residence time of 1 minute. The throughput will be reduced at all High-speed Centrifuges when using a bottom valve or at liquid-liquid separation up to 50%. All figures are approximate values. Subject to amendment and errors.

enlarge picture | open gallery